System repair & fan upgrades

Radon Fan Replacement in Lehi, UT

Describe your manometer reading, fan noise, or passive pipe setup online to connect with an independent local pro for a repair quote.

How do you know when a Lehi radon fan needs replacement?

An active radon mitigation fan runs 24 hours a day, 365 days a year—more than 8,700 hours annually—through freezing Northern Utah County winter inversions and triple-digit attic summers. EPA's Consumer's Guide to Radon Reduction notes that radon fans commonly last five years or more (with manufacturer warranties rarely exceeding five years), while Utah DEQ guidance notes many homeowners plan on fan replacement after roughly 10 to 15 years.

Because radon gives off no smell when a fan quits, your system's U-tube manometer (the clear U-shaped liquid tube mounted on the PVC pipe) is your early warning instrument.

Five signs your radon fan needs service

  • Even liquid levels on the manometer: When both sides of the U-tube sit at 0 (level with each other), vacuum has dropped to zero—indicating a tripped breaker, failed motor, disconnected coupling, or frozen condensate blockage.
  • Sudden pressure spike: If the liquid column climbs much higher than the installer's marked baseline, ice, debris, or groundwater may be blocking the suction pit or discharge pipe.
  • Grinding, rattling, or humming noises: Worn motor bearings, loose exterior mounting brackets, or water sloshing inside the fan housing cause noise that often resonates through bedroom walls or garage framing.
  • Tripped GFCI or exterior disconnect switch: Moisture intrusion inside an outdoor electrical box or failing motor windings can trip power to the fan.
  • Elevated two-year retest reading: Even when a fan still spins, worn impellers or new slab cracks can let indoor radon drift back above 4.0 pCi/L.

What about adding a fan to a builder-installed passive pipe?

Many newer homes in Lehi, Traverse Mountain, Saratoga Springs, and Eagle Mountain have a passive PVC radon vent already stubbed into the attic without a fan. If your post-occupancy test came back at 4.0 pCi/L or higher (or above 2.0–2.7 pCi/L and you want lower levels), an independent certified contractor can inspect the existing stack, verify the attic junction box, install a properly matched inline fan, add a U-tube manometer, and verify pressure draw.

Because replacement pricing varies by fan model, attic vs. exterior ladder access, electrical disconnect work, and whether couplings or mounting collars need upgrading—and no Utah public agency publishes fixed repair pricing—the independent professional who follows up provides your written estimate directly.

Get a Free Estimate

Areas We Cover in Northern Utah County

Common radon fan repair and upgrade scenarios

A qualified technician inspects airflow, electrical supply, pipe pitch, and mounting hardware rather than blindly swapping parts.

Failed or noisy inline fan swap

Replaces seized or loud exterior or attic radon fans with a properly sized model matched to your slab's soil resistance and existing PVC diameter.

Manometer and vacuum diagnostics

Checks why a U-tube gauge reads zero or spiked—testing power, flexible rubber couplings, pipe slope, and possible winter condensation freezing.

Passive rough-in fan activation

Converts an unpowered new-construction PVC stack into an active depressurization system with fan, electrical tie-in, and warning gauge.

Exterior housing and bracket upgrades

Replaces UV-cracked rubber couplings, secures vibrating exterior chases, and verifies discharge clearance above rooflines.

Why Use a Referral for Radon Fan Replacement?

Proper fan sizing for Utah soils

Swapping in the wrong fan curve can hurt suction or increase noise; an independent radon specialist matches airflow to your manometer readings.

Cold-weather condensation awareness

Local pros know how Northern Utah County winter freezes create ice plugs in poorly sloped exterior runs and how to correct pipe pitch.

Clear verification after repair

After restoring vacuum, EPA recommends confirming performance with a follow-up radon test so you know indoor levels dropped back down.

Free estimate referral

Share the fan location (attic or exterior) and your current manometer reading online to connect with a local specialist.

Contact Us Today for a Free Estimate

Hearing fan noise or seeing zero vacuum on your radon gauge in Lehi? Request a callback from an independent local pro today.

Get a Free Estimate

Free — no obligations

How a radon fan replacement visit works

1. Share your fan symptoms online

Tell us your city, whether the fan sits outdoors or in an attic, what the manometer shows, and any model number visible on the label.

2. Diagnostic check & direct quote

An independent local radon pro reviews power supply, pipe size, and fan type and gives you a written repair or upgrade estimate.

3. Fan swap & vibration isolation

The contractor installs the replacement fan with fresh flexible couplings, verifies electrical disconnect safety, and checks pipe drainage.

4. Mark the gauge & retest

The new baseline vacuum is marked on the U-tube manometer, and a short-term test confirms your radon levels remain low.

Radon Mitigation Services Available in Lehi, UT

Get a Free Estimate