Silicon Slopes new-build referrals

New Construction Radon Systems in Lehi, UT

Coordinate radon-resistant rough-ins before concrete pours—or convert an existing builder passive pipe—with an independent Northern Utah County pro.

Why build radon-resistant features into new Northern Utah County homes?

Northern Utah County is one of the fastest-growing residential corridors in the state. Between the 2020 Census base and U.S. Census Vintage 2024 estimates, Lehi grew by more than 17,500 residents (to 93,446), Eagle Mountain jumped by nearly 17,000 (to 60,575), and Saratoga Springs expanded by nearly 20,000 (to 57,411). Across all three cities, pre-mitigation radon tests average 4.4 to 4.9 pCi/L—well above the EPA's 4.0 pCi/L threshold.

Installing radon-resistant new construction (RRNC) features before the basement slab is poured is dramatically cleaner and less expensive than retrofitting a finished home later. The Utah Geological Survey reports that radon-resistant measures during home construction typically cost around $500, compared to $1,200 to $1,700 (and up to $2,000 per Utah DEQ) for an active retrofit after move-in.

What does Utah building code say about radon in new homes?

Many buyers assume new Utah subdivisions include mandatory radon piping by law. Under Utah Code Section 15A-3-206, International Residential Code (IRC) Appendix F (Radon Control Methods) is not mandated statewide. However, Utah statute specifies two important rules when a builder or owner chooses to include passive radon controls voluntarily:

  • Appendix F compliance: Voluntary passive radon controls (or portions of them) must comply with IRC Appendix F standards.
  • No extra municipal inspection required: Utah Code states that an additional building inspection is not required solely for a voluntary radon installation.

Because it is optional, buyers building custom or semi-custom homes in Lehi, Traverse Mountain, Bluffdale, or Saratoga Springs should confirm in writing before excavation whether full RRNC features are included—or hire an independent certified radon professional to coordinate directly with the builder.

What are the five EPA radon-resistant new construction features?

  • Gas-permeable layer: At least 4 inches of clean, coarse gravel beneath the basement slab so soil gas flows freely toward the vent tee.
  • Plastic vapor sheeting: Heavy 6-mil polyethylene sheeting laid over the gravel before concrete placement to block upward gas entry.
  • Sealing and caulking: Polyurethane caulk sealing slab joints, foundation cracks, sump covers, and utility pipe penetrations.
  • Interior PVC vent stack: A 3-inch or 4-inch rigid PVC pipe routed vertically from the gravel bed through conditioned framing (which helps create a natural warm draft) out through the roof and clearly labeled as a Radon System.
  • Attic electrical junction box: Pre-wired power in the attic next to the vent stack so an inline fan can be added easily if post-occupancy testing exceeds 4.0 pCi/L.

EPA guidance stresses that every new home built with passive RRNC must still be tested after occupancy. Passive systems reduce radon by roughly 30% to 70%, and activating them with a fan is quick when the rough-in was built right.

Get a Free Estimate

Areas We Cover in Northern Utah County

New-construction radon services available locally

Independent local radon professionals work with both custom homebuilders before slab pour and recent homebuyers evaluating builder rough-ins.

Pre-pour RRNC rough-in planning

Sub-slab gravel verification, tee placement, vapor barrier overlap, and interior chase routing planned before concrete arrives.

Passive stack inspection & activation

Tests whether a builder-installed passive pipe achieves sub-slab airflow and adds an attic radon fan, manometer, and labels if post-move-in levels top 4.0 pCi/L.

Multi-zone walkout rough-ins

Connects stepped basement bays and lower walkout slabs with sub-slab crossover pipes before interior footings isolate them.

Post-occupancy verification testing

Independent 48-hour continuous monitoring after closing and HVAC startup to prove whether passive venting keeps the home below EPA and WHO benchmarks.

New construction vs. retrofit cost benchmarks in Utah

ApproachPublished Utah figurePublic source
Radon-resistant features during new constructionAround $500Utah Geological Survey
Active mitigation retrofit in an existing home$1,200 to $1,700Utah Geological Survey
Standard active residential systemAround $1,500 to $2,000Utah DEQ guidance
Passive RRNC expected radon reduction30% to 70% (fan adds up to 99% total)U.S. EPA Consumer's Guide

Builder change-order pricing varies by home footprint and framing complexity. Request a direct quote from an independent local radon specialist.

Why Use a Referral for New Construction Radon Systems?

Avoid exterior pipes on brand-new siding

Planning an interior PVC chase during framing keeps pipes hidden inside closets and attics rather than strapped to new stucco or brick.

Clarity on Utah Code Section 15A-3-206

Understand what builders are and are not legally required to install before your slab is poured.

Smooth passive-to-active upgrades

Already closed on a Lehi or Saratoga Springs home with a passive pipe? Connect with an independent pro to test and activate it cleanly.

Zero referral charge

Share your build stage—pre-pour, framing, or post-closing—to get matched with an independent local specialist.

Contact Us Today for a Free Estimate

Building a new home or moving into a recent build in Lehi or Northern Utah County? Submit your construction stage for a free referral.

Get a Free Estimate

Free — no obligations

Steps for new-construction radon protection

1. Share your build stage or rough-in details

Let us know whether excavation is upcoming, framing is underway, or you already moved into a home with a passive PVC stub.

2. Coordinate with an independent radon specialist

A local pro reviews floor plans, foundation stem walls, and attic electrical access and issues a direct quote.

3. Install IRC Appendix F rough-in components

Sub-slab gravel, sealed vapor barrier, vertical PVC vent stack, and attic power box are installed cleanly during construction.

4. Test after move-in & activate if needed

Run a closed-house test once the home is occupied; if radon measures 4.0 pCi/L or higher (or above your personal target), add an inline fan in the attic.

Radon Mitigation Services Available in Lehi, UT

Get a Free Estimate